Menu
Your Cart

BeeCore F4 Built-in OSD Integrated 1-2S 10A Brushless ESC Flight Control - BLACK

BeeCore F4 Built-in OSD Integrated 1-2S 10A Brushless ESC Flight Control - BLACK image
BeeCore F4 Built-in OSD Integrated 1-2S 10A Brushless ESC Flight Control - BLACK image
BeeCore F4 Built-in OSD Integrated 1-2S 10A Brushless ESC Flight Control - BLACK image
Out Of Stock
BeeCore F4 Built-in OSD Integrated 1-2S 10A Brushless ESC Flight Control - BLACK image
BeeCore F4 Built-in OSD Integrated 1-2S 10A Brushless ESC Flight Control - BLACK image
BeeCore F4 Built-in OSD Integrated 1-2S 10A Brushless ESC Flight Control - BLACK image
BeeCore F4 Built-in OSD Integrated 1-2S 10A Brushless ESC Flight Control - BLACK
  • Stock: Out Of Stock
  • Model: BeeCore F4 Built-in OSD Integrated 1-2S 10A Brushless ESC Flight
  • SKU: 8986
USD$28.11
The BeeCore F4 flight control system 1-2S integrates a four-in-one brushless ESC, uses the MPU6000 sensor and connects via the SPI bus, which improves the sampling rate of the sensor. The F4 main control increases the operating frequency of the program and provides higher control accuracy. And faster response speed. The integrated OSD is equipped with Betaflight online tuning for the current horizon four-axis small brushless four-axis rack. The integrated 4-in-1 ESC supports DSHOT signal output. Light weight, small size, thin thickness and so on.
For receiver configuration, SBUS / IBUS and DSM receiver inputs, configure RX2 as an input interface.

Flight control configuration:
CPU: STM32F411CEU6
Sensor: MPU-6000 three-axis accelerometer / three-axis gyroscope (SPI connection)
Power: 1 - 2S battery input (DC 3.2V - 8.4V)
BEC: Built-in circuit (1S input BEC output 0.5A, 2S input BEC output 1.5A)
Receiver: PPM, SBUS, IBUS, DSM2 / DSMX, 1024 / 208.
Built-in OSD interface
Support BLheli Suite ESC programming
Support DHSOT ESC
Built-in voltage detection
Board size: 28.5 * 28.5MM
Screw hole spacing: 24.5 * 24.5MM diameter 3.0MM

Brushless ESC configuration:
Power: 1-2S
Current: 10A continuous peak 12A (for 2 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.HEX
Signal support: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM

Interface abbreviation description:
G: Negative GND
V: + 5V
O: Connect the picture to VTX
I: Connect camera CAM

M1, M2, M3, M4: Brushless motor
+: 1-2S battery is being input
 - : 1-2S battery negative input
3: + 3.3V
D: DSM, IBUS, PPM receiver input
S: SBUS signal receiver input
5: + 5V
G: GND negative

Specification

Dimensions and Weight

Product weight: 0.0032 kg 
Package weight: 0.0050 kg 
Package size: 6.00 x 9.00 x 2.00 cm / 2.36 x 3.54 x 0.79 inches

Package Contents

Package Contents: 1 x Flight Control, 4 x 3p 1.25mm In-line, 1 x Power Plug Cord

Write a review

Please login or register to review