Menu
Your Cart

Pickup from Wangara Warehouse available - Mon-Fri 1630 to 1800 or Saturday 0900 to 1230
other times available - just make an appointment


Happymodel Sailfly-X 2-3S Micro brushless FPV racer drone FRSKY

Happymodel Sailfly-X 2-3S Micro brushless FPV racer drone FRSKY
Happymodel Sailfly-X 2-3S Micro brushless FPV racer drone FRSKY
Happymodel Sailfly-X 2-3S Micro brushless FPV racer drone FRSKY
Out Of Stock
Happymodel Sailfly-X 2-3S Micro brushless FPV racer drone FRSKY
Happymodel Sailfly-X 2-3S Micro brushless FPV racer drone FRSKY
Happymodel Sailfly-X 2-3S Micro brushless FPV racer drone FRSKY
Happymodel Sailfly-X 2-3S Micro brushless FPV racer drone FRSKY
  • Stock: Out Of Stock
  • Model: Happymodel Sailfly-X 2-3S Micro brushless FPV racer drone FRSKY
AUD $135.81

Happymodel Sailfly-X 2-3S Micro brushless FPV racer drone 
 
Specifications:
Brand Name: Happymodel
Item Name: Sailfly-X 2-3S Micro FPV racing drone
Wheelbase: 105mm
Size: 95mm*95mm*50mm(without propellers)
Weight: 35g(without battery)
Weight:60g(with Original 3s 300mah Lipo battery )
 
Features:
Crazybee F4 PRO V2.1 AIO Flight controller 2-3s Lipo Compatible
The lightest 1102 brushless motor only 2.7g with double ball bearings 
Light ,Powerful and smoothly 
AIO 5.8g 40ch 25mw vtx / 700tvl camera with smartaudio
2mm carbon fiber frame with TPU 3d-printed canopy 
Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles
Frsky version support both NON-EU and EU-LBT Frsky transmitter(EU-LBT need to update firmware to Betaflight 4.0( release date :2019-4-11)

Full telemetry function ready (Frsky and Flysky version support)
Real Bind and Fly version
Compatible both for 2s-3s Lipo/LIHV
 
Package includes:

Item NameQty
Sailfly-X frame1
30 degree angle canopy(red 3d print tpu)1
40 degree angle canopy(purple 3d print tpu)1
Option1: Crazybee F4FR V2.1 PRO FC built-in Frsky RX1



EX1102 KV9000 Motor4
65mm propeller(6cw+6ccw)1
HCF7P 25mw VTX/700tvl camera AIO1
3S 11.4v 300mah 30C/60C battery1
Propeller disassemble tool1
Screwdriver1
 

 
 
Spare parts specifications:

MotorMode: EX1102 KV9000
Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ13.5mm*16mm
Weight(g):2.8g
No.of Cells(Lipo):2S-3S
Flight controller(Frsky version) CRAZYBEE F4FR PRO V2.1 Firmware target: CrazybeeF4FR

MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)

Board size: 28.5 * 28.5MM
Power supply: 2-3S battery input (DC 7.4-13V)

Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)

Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 28A
Current meter scale set to 1175
Built-in 5V 1A BEC with LC filter
Built-in voltage detection
Onboard 4in1 ESCMCU upgraded to EFM8BB21
Power supply: 2-3S LiPo/LiPo HV (7.4v/13v)
Current: 5A continuous peak 6A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.Hex
Default protocol: DSHOT600
Frsky receiver VersionSPI BUS receiver
Frsky D8/D16 switchable
Compatible both Non EU and EU-LBT transmitter Channels: 8ch or 16ch
EU-LBT support(need to update betaflght v4.0 date 2019-04-11)
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m

AIO Camera&VTX

Write a review

Please login or register to review