DIATONE GTB 329 PRO AIO BOARD-TBS NANO VTX

This is the new upgraded PRO version of the popular Diatone CUBE PNP Line.
The main differences between the new Pro and previous generation:

-The stack now has been replaced by a new Diatone AIO board.
-339 (3 inch) Variant now is available for 2S or 3S batteries 
-3S version of the 339 now has a thicker 4mm main frame

please make sure to choose the correct variant from the drop down menu depending on what battery you will be using.
All variants use the same AIO board so technically they will be fine with any lipo range 2-4S.
We highly recommend the following combinations and batteries to insure the longevity of your ESC and motors.

GTB229 2S (Recommended GNB/Tattu/Infinity 450-520mAh)
GTB329 2S (Recommended GNB/Tattu/Infinity 450-650mAh)
GTB339 3S (Recommended GNB/Infinity 450-520mAh)

Specification:
Brand name: Diatone
Item name: DIATONE GTB 229  329  339  PRO AIO

Props：2.5inch  3inch

Weight about ：46g -55g

FC Specifications
MCU:  MAMBA F411 NANO   AIO                                                                      
IMU: MPU6000
Baro: No
OSD: BF OSD
Blacbox: NO
ESC Soft: Dshot300/600
Input: 2~4S Lipo (8.4~16.7V)   
BEC: 5V 1.5A 

Camera:  RUNCAM NANO2 Camera                                                          

Antenna: Copper pipe antenna                                                                                 

VTX: TBS UNIFY PRO32 NANO                                                        

Motor: MAMBA Racing MB1103 1105

Lipo:

2S version 300-450mah 

3S  version 300-450mah

CUBE 229 Bottom Thickness：3 mm  1103 8500KV 2S

CUBE 329 Bottom Thickness：3 mm 1103 6500KV 2S

CUBE 339 Bottom Thickness：4 mm 1105 5500KV 3S

ESC Specifications
INPUT VOLTAGE:2~4S Lipo (8.4~16.7V)   
CONTINUE CURRENT: 13 A×4
BEC: NO SOFT: Dshot600
MOUNTING: 20mm/M2

FC Firmware
BetaFlight
Target: MAMBA F411 （uploading.....）  Download