Your Cart
Warehouse Open for Click and Collect orders
Mon - Fri (1630 - 1800)   Sat(0900 - 1230)

Nazgul5 V2 4S 6S FPV Drone


    Nazgul5 V2 is a 5" size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. 


    VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.


    - 5mm arm design for more durability

    - Easy-Swap arms

    LED illuminated Logo

    - XING-E 2207 motors and NAZGUL 5140 props
    - 5" version also fits 5.1" style propellers
    - Popular True-X configuration
    - TPU crash-guards
    - Fits both 30.5x and 20x stacks

    XL5 V5 frame specs:


    - Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

    To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

    - Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

    Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

    Nazgul5 V2 Quad BNF Included Components and Parts

    • Prebuilt and tested Quadcopter
    • 1x Nazgul5(XL5 V5) Frame
    • 1x RaceCam R1 Mini 1200TVL 2.1mm 19*19
    • 1x Albatross RHCP SMA 5.8g antenna
    • 2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
    • 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
    • 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)


    May 31st,2021: Before SucceX-E F4 Stack changed to SucceX-E F7 Stack.

    June,2021: Before Caddx Ratel camera changed to RaceCam R1 Mini camera.

    FC // SucceX-E F7 Flight controller

    - MCU: STM32F22RET6 216MHz

    - Gyro: MPU6000

    - Baro: DSP310 (Barometer can only be used with Betaflight 4.3.0 and above)


    - BEC: 5V 2.5A

    - BlackBox: 16MB


    - UART1 for VTX HD(for 4-6S Vista,for 4S DJI Air Unit)/AnalogTelemetry

    - UART2 for Receiver

    - UART4 for Free 

    - UART5 for ESC Telemetry

    - 4×Dshot/PWM outputs

    - Smartaudio & IRC Tramp VTX protocol supported

    - WS2812 led Strip: Yes

    - Bepper: Yes

    - Firmware: IFLIGHT_SUCCEX_E_F7

    Outer Size: 36*36mm / 30.5*30.5/φ4 mounting

    - Weight: 6.9g

    ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

    - Dimension: 36*43mm

    - Mounting Holes: 30.5*30.5mm/Φ3mm

    - Weight: 15g (without wire)

    - Supports 2-6S Lipo input

    EFM8BB21 MCU, 24Mhz Runs BLHeli_S 16.X Firmware

    - Current sensor: YES

    - BEC: NO

    -Constant: 45A / Burst: 50A

    - Supports: DShot150/300/600/MultiShot/OneShot etc.

    - Target: G-H-30 BLS 16.7

    VTX// SucceX Force 5.8g 800mW VTX Adjustable

    - The output power is stable;

    - Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;

    Output 48 frequency points, 

    - Frequency lock fast, the boot does not interfere with companions;

    - Built-in output power self-check function;

    - Full format video format: NTSC /PAL;

    - Wide input voltage range. low power consumption:


    - Small size:36*36*3mm

    - Mounting holes 4-M3

    - Lightweight: 7.2g(excluding antenna)


    - Item: SucceX-Force 800mW adjustable VTX

    - Input voltage:5V

    - Output voltage/ Max current: 5V 1A

    - 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW,250mA@400mW, 380mA@800mW

    - Output 48 frequency points, 


    - PIT/25mW/200mW/400mW/800mW

    Additional Suggested Parts

Write a review

Please login or register to review