Happy Model - Crux3 Brushless Toothpick class FPV Drone

More from this brand

CRAZYBEE F4 Lite Frsky whoop board and vtx

AUD $69.07

Ex Tax:AUD $62.79

Happy Model - Mobula6 1S 65mm Brushless whoop drone BNF

AUD $131.18

Ex Tax:AUD $119.26

HappyModel 1S 3.8V 650mAh 30C Lipo Lihv Battery PH2.0 Plug

AUD $10.07

Ex Tax:AUD $9.15

Happymodel BeecoreX FR Brushed F4+ESC +VTX+RX+OSD Flight Controller

AUD $50.45

Ex Tax:AUD $45.86

Description
Reviews

Features:
41gram 1-2s brushless Toothpick drone
New AIO 4in1 CrazybeeX flight controller
CADDX ANT Camera
New 1202.5 brushless motor
XT30 connector
Recommend to use 2s 350mah/400mah/450mah/520mah battery
Compatible with Insta360 Go Camera

Specifications：
Brand Name: Happymodel
Item Name: Crux3
Wheelbase: 115mm
Size: 97mmx97mmx35mm(without propellers)
Weight: 41g(without battery)

Package includes:

Item Name	Qty
Crux3 Frame and canopy	1
CrazybeeX FR V2.2 built-in internal Frsky SPI D8/D16 receiver	1

Happymodel EX1202.5 KV6400 brushless motor		4
Gemfan 3018 bi-blade Propellers(4cw+4ccw)		1
Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera		1
5.8G 25mw~200mw 40ch vtx (Flight controller built-in)	1
Screw Driver	1
Propeller disassemble tool	1
Happymodel Handbag	1

Motor	Mode: EX1202.5 KV6400 Configu-ration:9N12P Stator Diamter:12mm Stator Length:2.5mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.Len):Φ14mm14.5mm Weight(g):4.4g No.of Cells(Lipo):1-2S
Propellers	Gemfan 3018-2 Center Thickness:5.5mm Prop Diameter:76.5mm Center Hole diameter:1.5mm
Flight controller	(Frsky SPI RX version) CRAZYBEEX FR V2.2 FC Firmware target: CrazybeeF4FR MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1-2S battery input (DC 2.9V-8.7V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky receiver or no receiver Built-in 5V 1A BEC
Onboard 4in1 ESC	MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: S_H_50_REV16_7.HEX Default protocol: DSHOT600
Onboard Frsky SPI D8 receiver Version	SPI BUS receiver Frsky D8 compatible Compatible Non EU transmitter D8 model Channels: 8ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m
Onboard Flysky SPI receiver Version	SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 200~300m Failsafe support
Onboard DSM2/X SPI receiver Version	SPI BUS receiver DSM2/DSMX compatible Channels: Max 12ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m RSSI enable(show on the goggles)
External Frsky R-XSR receiver version	Weight: 1.5g Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel) Operating Voltage Range: 3.5V~10V Operating Current:70mA@5V Firmware Upgradable Compatibility: FrSky X Series modules and radios in D16 mode Could support Frsky New ACCESS Protocol ( Upgrade firmware)
External TBS CRSF Nano receiver version	Original TBS CROSSFIRE Receiver ,CRSF Protocol , Official TBS transmitter compatible
Onboard 5.8g VTX	Output power: 25mw~200mw switchable Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race band Smartaudio ready
Caddx ANT 1200tvl camera	Image Sensor: 1/3" CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL IMAGE: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: 0.001Lux@F1.2 Auto Gain Control: YES BLC: YES WDR: Global WDR DNR: 3D DNR Dimensions: 1414mm(with bracket to 1919mm) Wide Power Input: DC 3.7-18V Work Temperature: -20℃~+60℃ Weight: 2g (N.W.)

NameLessRC D400 VTX + DVR AIO

HighlightsVTX maximum power up to 400mW.Built-in microphone.Support to choose recording FC OSD info or not.Start/Stop recording via button or OSD. Aut..

AUD $41.65

Ex Tax:AUD $37.87

TBS GRAPHENE 520MAH 2S HV

The TBS Graphene packs are here! You get power when you need it, without regret. It takes a lot of abuse and doesn't set you back much from the start...

AUD $14.91

Ex Tax:AUD $13.55

TBS TRACER IMMORTAL T ANTENNA

The default antenna included with the TBS Tracer is the Immortal T 2.4GHz antenna, manufactured by TBS. It is made from light weight, multi-strand sta..

AUD $7.90

Ex Tax:AUD $7.18

BATTERY RUBBER BANDS (10-PACK)

A 10 Pack of rubber bands that are normally included with the ToothPick 3 - also works great with BabyTooth framesYou no longer need to sear..

AUD $3.80

Ex Tax:AUD $3.45

iSDT 608AC Smart Battery Charger AC 50W DC 200W 8A w/ Detachable Power Supply

The iSDT 608AC is a unique AC/DC charger whose standout feature is the ability to detach the AC power supply. Use the whole unit at home for an all-in..

AUD $98.77

Ex Tax:AUD $89.79

CRAZYBEE F4 Lite Frsky whoop board and vtx

Replacement board for the popular Mobula 6 WhoopProduct descriptionFlight controller:(Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware ta..

AUD $69.07

Ex Tax:AUD $62.79

Happy Model - Mobula6 1S 65mm Brushless whoop drone BNF

Features:AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTXExtreme light 1S 65mm Brushless whoop only 20gRuncam Nano3 The lightest 1/3 CMOS..

AUD $131.18

Ex Tax:AUD $119.26