Menu
Your Cart
Warehouse available for Pickups Weekdays 4:30pm to 6pm
Saturday 9am - 12:30pm (click for directions)

MAMBA BASIC F405MK3 LITE STACK 40A

MAMBA Basic F405 MK3 LITE FC& 40AMK2 8bit ESC 6S Stack

Diagram Link From Help Centre Link

Fixed

  • Add I2C function
  • When you connect the USB, the receiver and OSD settings can be saved
  • Increase the pad area
  • LED signal selection (when Mamba Led sys available)
  • BEC short circuit protection
  • TVS instant high voltage protection 30V

Update

  • Upgrade the anti-interference cable
  • Use Typec(Most)
  • The pad area of the Mini flight controller (20×20) increased by 140%

Added

  • Add self-recovery insurance to the receiver's 5V power supply.
  • Increase the camera VCC power supply pad.
  • The standard flight controller (30.5×30.5) adds a spare pad.
  • Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference.

    FC Specification

    MAMBA Basic F405MK3 lite
    MCU: 168MHz STM32F405RGT6
    GYRO: MPU6000
    Barometer: No
    OSD: Yes
    Blackbox: 16M Flash Memory
    Uarts: 5Set
    ESC Soft: Dshot300/600
    ESC Telemetry: Yes
    Power Led: Yes
    LED Controller: BF LED
    4 Set 2812 LED
    S/F.Port: Yes
    RSSI: Yes
    Buzz: Yes
    Input: 3~6S Lipo (12.6~25.2V)
    TVS Protection: Yes
    BEC:3.3V 0.5A& 5V 3A & 9V 3A
    MOUNTING: 30.5mm, M3

    ESC Specifications
    MAMBA F40 MK2
    INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
    CONTINUE CURRENT:40A×4
    BURST CURRENT:50A (10S)
    BEC: No
    Target
    BLHeli_S CH40
    SOFT: Dshot300/600
    TVS Protection: Yes
    MOUNTING: 30.5mm/M3


    Supply :
    High-Frequency 470uF/35V ×1
    8pin sh1.0  ×2
    12AWG 100mm ×2
    AMASS Original XT60   

    Write a review

    Please login or register to review