Menu
Your Cart
Warehouse available for Pickups Weekdays 4:30pm to 6pm
Saturday 9am - 12:30pm (click for directions)

MAMBA BASIC F722 MINI MK3 STACK 40A

MAMBA Stack Basic F722 Mini MK3 40A 6S 8bit

Diagram Link From Help Centre Link

Fixed

  • Add I2C function
  • When you connect the USB, the receiver and OSD settings can be saved
  • Increase the pad area
  • LED signal selection (when Mamba Led sys avaiable)
  • BEC short circuit protection
  • TVS instant high voltage protection 30V

Update

  • Upgrade the anti-interference cable
  • Use Typec(Most)
  • The pad area of the Mini flight controller (20×20) increased by 140%

Added

  • Add self-recovery insurance to the receiver's 5V power supply.
  • Increase the camera VCC power supply pad.
  • The standard flight controller (30.5×30.5) adds a spare pad.
  • Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference.

    Model: Mamba Stack Basic F722 Mini MK3 40A BLS 6S

    FC Specifications
    MAMBA Basic F722MINI MK3
    MCU: 216MHz STM32F722RET6
    GYRO: MPU6000
    Barometer: Yes
    OSD: Yes
    Blackbox: 16M Flash Memory
    Uarts: 6 Set
    ESC Soft: Dshot300/600
    ESC Telemetry: Yes
    Power Led: Yes
    LED Controller: BF LED
    S/F.Port: Yes
    RSSI: Yes
    Buzz: Yes
    Input: 2~6S Lipo (8.4~25.2V)
    TVS Protection: Yes
    BEC:3.3V 0.5A&  5V 2.5A
    MOUNTING: 20mm, M2

    ESC Specifications
    MAMBA F40_BLS MINI
    INPUT VOLTAGE: 2~6S Lipo (8.4V~25V)
    CONTINUE CURRENT: 40A×4
    BURST CURRENT: 45A (10S)  
    BEC: No
    Target
    BLHeli_S CH40
    SOFT: Dshot300/600
    TVS Protection: Yes
    MOUNTING: 20mm, M3/M2
                                                                                                      

    Supply :
    High-Frequency 470uF/35V ×1
    8pin sh1.0  ×2
    16AWG 60mm ×2
    AMASS Original XT60  

    Write a review

    Please login or register to review