Menu
Your Cart
Warehouse available for Pickups Weekdays 4:30pm to 6pm
Saturday 9am - 12:30pm (click for directions)

Mamba Basic F722 MK3 Stack Blheli32 50A

Mamba Basic F722 MK3 Stack Blheli32 50A
Mamba Basic F722 MK3 Stack Blheli32 50A
Mamba Basic F722 MK3 Stack Blheli32 50A
Mamba Basic F722 MK3 Stack Blheli32 50A
Mamba Basic F722 MK3 Stack Blheli32 50A
Mamba Basic F722 MK3 Stack Blheli32 50A
Mamba Basic F722 MK3 Stack Blheli32 50A
Mamba Basic F722 MK3 Stack Blheli32 50A
Mamba Basic F722 MK3 Stack Blheli32 50A
New
Mamba Basic F722 MK3 Stack Blheli32 50A
Mamba Basic F722 MK3 Stack Blheli32 50A
Mamba Basic F722 MK3 Stack Blheli32 50A
Mamba Basic F722 MK3 Stack Blheli32 50A
Mamba Basic F722 MK3 Stack Blheli32 50A
Mamba Basic F722 MK3 Stack Blheli32 50A
Mamba Basic F722 MK3 Stack Blheli32 50A
Mamba Basic F722 MK3 Stack Blheli32 50A
Mamba Basic F722 MK3 Stack Blheli32 50A
Mamba Basic F722 MK3 Stack Blheli32 50A
  • Stock: In Stock
  • Model: Mamba Basic F722 MK3 Stack Blheli32 50A
AUD $113.95

Description

MAMBA Stack F722 MK3 50A 6S 32bit (NO WIFI)

Diagram Link From Help Centre Link

Fixed

  • Add I2C function
  • When you connect the USB, the receiver and OSD settings can be saved
  • Increase the pad area
  • LED signal selection (when Mamba Led sys avaiable)
  • BEC short circuit protection
  • TVS instant high voltage protection 30V

Update

  • Upgrade the anti-interference cable
  • Use Typec(Most)
  • The pad area of the Mini flight controller (20×20) increased by 140%

Added

  • Add self-recovery insurance to the receiver's 5V power supply.
  • Increase the camera VCC power supply pad.
  • The standard flight controller (30.5×30.5) adds a spare pad.
  • Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference.

    FC Specifications

    MAMBA Basic F722MK3
    MCU: 216MHz STM32F722RET6
    GYRO: MPU6000
    Barometer: Yes
    OSD: Yes
    Blackbox: 16M Flash Memory
    Uarts: 6Set
    ESC Soft: Dshot300/600
    ESC Telemetry: Yes
    Power Led: Yes
    LED Controller: BF LED/MB LED(4 Set 2812 LED)
    S/F.Port: Yes
    RSSI: Yes
    Buzz: Yes
    Input: 3~6S Lipo (12.6~25.2V)
    TVS Protection: Yes
    BEC:3.3V 0.5A& 5V 3A (System Power)&
    5V 3A(LED)& 9V 3A
    MOUNTING: 30.5mm, M3

    ESC Specifications
    MAMBA F50_BL32
    INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
    CONTINUE CURRENT:50A×4
    BURST CURRENT:60A (10S)
    BEC: No
    Target:BLHeli_32 MAMBA F50_BL32
    SOFT: Dshot300/600/1200
    TVS Protection: Yes
    MOUNTING: 30.5mm/M3

    Supply :
    High-Frequency 470uF/35V ×1
    8pin sh1.0 ×2
    12AWG 100mm ×2
    AMASS Original XT60

    Write a review

    Please login or register to review