Your Cart
Warehouse Open for Click and Collect orders
Mon - Fri (1630 - 1800)   Sat(0900 - 1230)

MAMBA Stack Basic F722 Mini MK3 40A 6S BL32 Pro M2/20MM


MAMBA Stack Basic F722 Mini MK3 40A 6S 32bit


  • Add I2C function
  • When you connect the USB, the receiver and OSD settings can be saved
  • Increase the pad area
  • LED signal selection (when Mamba Led sys avaiable)
  • BEC short circuit protection
  • TVS instant high voltage protection 30V


  • Upgrade the anti-interference cable
  • Use Typec(Most)
  • The pad area of the Mini flight controller (20×20) increased by 140%


  • Add self-recovery insurance to the receiver's 5V power supply.
  • Increase the camera VCC power supply pad.
  • The standard flight controller (30.5×30.5) adds a spare pad.
  • Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference.
  • Model: Mamba Stack Basic F722 Mini MK3 40A BLS 6S

FC Specifications

  • MAMBA Basic F722MINI MK3
  • MCU: 216MHz STM32F722RET6
  • GYRO: MPU6000
  • Barometer: Yes
  • OSD: Yes
  • Blackbox: 16M Flash Memory
  • Uarts: 6 Set
  • ESC Soft: Dshot300/600
  • ESC Telemetry: Yes
  • Power Led: Yes
  • LED Controller: BF LED
  • S/F.Port: Yes
  • RSSI: Yes
  • Buzz: Yes
  • Input: 2~6S Lipo (8.4~25.2V)
  • TVS Protection: Yes
  • BEC:3.3V 0.5A& 5V 2.5A
  • MOUNTING: 20mm, M2

ESC Specifications

  • INPUT VOLTAGE: 2~6S Lipo (8.4V~25V)
  • BURST CURRENT: 45A (10S)
  • BEC: No
  • Target:BLHeli_S CH40
  • SOFT: Dshot300/600/1200
  • TVS Protection: Yes
  • MOUNTING: 20mm, M3/M2

Supply :

  • High-Frequency 470uF/35V ×1
  • 8pin sh1.0 ×2
  • 16AWG 60mm ×2
  • AMASS Original XT60

Write a review

Please login or register to review