Menu
Your Cart
Warehouse Open for Click and Collect orders
Mon - Fri (1630 - 1800)   Sat(0900 - 1230)

DIATONE MAMBA F722 APP FLIGHT CONTROLLER

MAMBA F722S APP I2C WIFI

FIRMWARE TARGET /CONFIG: MAMBA F722 I2C

Note:Since STM32F722 Produces a lot of heat, please leave at least 5mm interspace at both sides of the FC with nothing covered to make sure a good air circulation.

Update Details:

  • BT to WiFi
  • USB power supply can use receiver, OSD
  • Add a group of I2C pads (SCL SDA)
  • Add inverter Dual-Way TX serial port
  • Add 2812 LED switch function, key can turn off led
  • Add 4 corner LED interface to support BF led and Mamba led
  • Upgrade to stronger type-C, optimize pad position


FC Specifications

  • MCU: 216MHz STM32F722RET6 32BIT
  • IMU: MPU6000
  • Barometer: No
  • OSD: BF OSD
  • Blacbox: 16M Flash Memory
  • Uarts: 6Set
  • ESC Soft: Dshot300/600/1200
  • ESC Telemetry: RX6
  • LED indicator: Blue&Orange for FC Status,Green 9V,White 5V,Red 3.3V
  • LED Controller:BF LED/MB LED( 4 Set 2812 LED)
  • WIFI: SpeedyBee APP
  • Smartaudio: Yes
  • Buzz: Yes
  • Input: 3~6S Lipo (12.6~25V)
  • TVS Protection: Yes
  • BEC: 5V 2.5A & 9V 2A (Max 3A)
  • MOUNTING: 30.5mm/M3 WEIGHT: 9g
  • Supply :
  • 8pin sh1.0 *1

  • Smartaudio: Yes
  • Buzz: Yes

  • Input: 3~6S Lipo (12.6~25V)
  • VTS Protection: Yes

Write a review

Please login or register to review