Matek VRX-1G3 1.2-1.3GHz 9CH Video Receiver Module

More from this brand

HUBOSD8-SE, W/STOSD8-SE, CURRENT SENSOR, DUAL BEC, 6S MAX

AUD $25.58

Ex Tax:AUD $23.26

Matek F405-Wing Flight Controller STM32F405, MPU6000, INAVOSD, BMP280

AUD $75.84

Ex Tax:AUD $68.94

Matek FCHUB-W PDB For Fixed Wings / INAV

AUD $24.27

Ex Tax:AUD $22.06

Matek Mini Power HUB with BEC 5V & 12V V3.1

AUD $10.11

Ex Tax:AUD $9.19

Description
Reviews

Receiver Only - 1.2ghz is not used in Australia (export)

Features & Specifications

Receiving frequency: 9CH (1080MHz to 1360MHz)
RX Sensitivity: -95dBm
Band-pass filter 950MHz~1450MHz
Dual input options: 4~5V via pins or 6-30V via pads
Button control and LED indicators

On board regulator output: 5V 2A @ input voltage 6~30V
Current Consumption: 0.3A @5V
Video format: NTSC or PAL
Video Output impedance: 75Ω, Typ.
Audio Subcarrier Frequency: 6.5 MHz & 6.0MHz
ANT. input impedance: 50Ω, Typ.
RF Connector: SMA

Weight: 14g ( w/o antanna)
Size: board 43*27mm
2.54mm pins and PCB size are compatible with FS module

Includes

1x 1.2/1.3G Video receiver VRX-1G3
1x Dipole antenna_SMA, center freq 1240MHz

Settings

Press and hold the button 2 seconds to enter the frequency setting. Frequency LED blinks
Press the button to select the frequency
When the LED blinks at new frequency, RF input is enabled on this frequency.
New frequency will be saved if no button action within 3 seconds

Tags: matek , 3ghz , video , receiver , module , goggles , Matek , VRX-1G3 , 1.2-1.3GHz , Video , Receiver , Module , Fpv Goggles , VTX / VRX , Fpv Goggles Matek VRX-1G3 1.2-1.3GHz 9CH Video Receiver Module , VTX / VRX Matek VRX-1G3 1.2-1.3GHz 9CH Video Receiver Module , Matek VRX-1G3 1.2-1.3GHz 9CH Video Receiver Module Fpv Goggles , Matek VRX-1G3 1.2-1.3GHz 9CH Video Receiver Module VTX / VRX

Power Distribution Board for Piko BLX flight controller

The PIKO BLX flight controller mounting hole is 20x20mm hole to hole dimension. This power distribution board is designed to mount the PIKO BLX fli..

AUD $6.60

Ex Tax:AUD $6.00

Matek F765-WING Flight Controller

F765-WING Quick Start Guide (PDF 9M)FC Specifications MCU: STM32F765VIT6, 216MHz , 512KB RAM, 2MB Flash IMU: MPU6000 (SPI1) & ICM20602..

AUD $104.93

Ex Tax:AUD $95.39

2 Part Epoxy

4-6 Minute A/B Epoxy Glue. A very high quality clear setting epoxy glue. Excellent gap filling and bonding properties on almost all surfaces includi..

AUD $3.03

Ex Tax:AUD $2.76

JST-PH 2.0 PowerWhoop Power Cable Pigtail

Upgrade JST-PH 2.0 connector, AKA PowerWhoop connector, the pins will not loose easily. Must have with HV battery and high performance. The me..

AUD $1.52

Ex Tax:AUD $1.38

HUBOSD8-SE, W/STOSD8-SE, CURRENT SENSOR, DUAL BEC, 6S MAX

6S OSD PDB ! ..

AUD $25.58

Ex Tax:AUD $23.26

Matek F405-Wing Flight Controller STM32F405, MPU6000, INAVOSD, BMP280

FC Specifications MCU: 168MHz STM32F405 IMU: MPU6000 accelerometer/gyro (SPI) Baro: BMP280 (I2C) OSD: INAV OSD w/ AT7456E chip Blackbox: MicroS..

AUD $75.84

Ex Tax:AUD $68.94

Matek FCHUB-W PDB For Fixed Wings / INAV

Product Details PDB Input voltage range: 9~30V (3~6S LiPo) w/TVS protection 2x ESC power pads Current Sensor: 104A, 3.3V ADC, Scale ..

AUD $24.27

Ex Tax:AUD $22.06

Matek Mini Power HUB with BEC 5V & 12V V3.1

Details Mini POWER HUB has been designed to provide the best possible performance and reliability in a small 36*36mm PCB. The HUB distributes power..

AUD $10.11

Ex Tax:AUD $9.19