Matek F411-Wing Flight Controller
Matek F411-Wing Flight Controller
Matek F411-Wing Flight Controller
Matek F411-Wing Flight Controller
Matek F411-Wing Flight Controller
Matek F411-Wing Flight Controller
Matek F411-Wing Flight Controller
Matek F411-Wing Flight Controller
Matek F411-Wing Flight Controller
Matek F411-Wing Flight Controller

Matek F411-Wing Flight Controller

The INAV capable Matek F411-Wing is a smaller version of the 405-Wing Flight Controller. Even though it's smaller, doesn't...
Vendor: Buzz Fpv
Availability: Out Of Stock
$50.91
$50.91
Subtotal: $50.91
Matek F411-Wing Flight Controller

Matek F411-Wing Flight Controller

$50.91
Matek F411-Wing Flight Controller
Matek F411-Wing Flight Controller
Matek F411-Wing Flight Controller
Matek F411-Wing Flight Controller
Matek F411-Wing Flight Controller

Matek F411-Wing Flight Controller

$50.91
Description

The INAV capable Matek F411-Wing is a smaller version of the 405-Wing Flight Controller. Even though it's smaller, doesn't mean it skimps on features. It comes equipped with many of the essential features found on the full-size version such as multiple BECs, a current sensor, OSD, Barometer, and an MPU6000 IMU.

The small size (28 x 41mm) means it can fit on almost any size of aircraft. This FC is perfect for smaller sized fixed-wing aircraft that are tight on space.

Differences between the 405-Wing and 411-Wing

Features the 411 is missing compared to the 405

  • Blackbox Logging
  • No 12V BEC for FPV gear
  • No RSSI input
  • Lower current 5V BEC at 3A (F405 wing has 5A BEC)
  • 2 UARTS (F405 wing has 6)
  • 1 I2C (F405 wing has 2)
  • Smaller current sensor (78A vs 104A)
  • Lower current 3.3V BEC at 200mA (F405 wing has 300mA)

Specifications

  • MCU: 100MHz STM32F411
  • IMU: MPU6000 accelerometer/gyro (SPI)
  • Baro: BMP280 (I2C)
  • OSD: INAV OSD w/ AT7456E chip
  • Blackbox: No
  • VCP & 2x UARTs
  • 2x Motors, 5x Servos outputs
  • 1x I2C
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • Built-in inverter for SBUS input (UART1-RX)
  • SoftSerial_Tx1: ST1 pad by default
  • PPM: ST1 pad with softserial disabled
  • Battery Voltage Sensor: 1:10 (Scale 1100)
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: No
  • FC Firmware

INAV Flight

  • Target: MATEKF411

PDB

  • Input voltage range: 6.5~30V (2~6S LiPo) w/TVS protection
  • 2x ESC power pads
  • Current Senor: 78A, 3.3V ADC, Scale 423

BEC 5V output

  • Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
  • Continuous current: 2 Amps

BEC Vx output

  • Designed for Servos
  • Voltage adjustable, 5V Default, 6V via jumper
  • Continuous current: 3 Amps

BEC 3.3V output

  • Designed for Baro / Compass module/ OLED and Spektrum RX
  • Linear Regulator
  • Continuous current: 200mA

Physical

  • Mounting: 24 x 24mm, Φ2mm
  • Dimensions: 41 x 28 x 10mm
  • Weight: 7g (Total 12g w/ bottom plate and M2 standoffs)

Resources and Downloads

Related Products

Example product title
$50.91
$50.91
Example product title
$50.91
$50.91
Example product title
$50.91
$50.91
Example product title
$50.91
$50.91
Example product title
$50.91
$50.91
Example product title
$50.91
$50.91

Recently Viewed Products