HAPPYMODEL

The CrazyF411 ELRS flight controller comes with integrated UART 2.4GHz ExpressLRS receiver and 20A BLHeli_S ESC(Bluejay firmware pre-installed) which could support 2-4s. Bigger Mosfet could support high to 20A currents would be better for 2-4S toothpick drone or long range FPV drone. And because...

CrazyF411 pro is a high integration AIO F4 flight controller which could handle 20A continuous current .It comes with 4*Motor Pluggable Pins and Not Pre-solder in default, fits your needs of self-assembly best Compatible with 120X/130X/140X/ motorsIntegrated with a STM32F411CEU6 processor, Betaflight  OSD,  ...

HappyModel CrossF4 AIO 1-2S Flight Controller BMI270 + 5A 4IN1 ESC UART ELRS V3.0***Bind procedure is the same like Happymodel EP1/EP2 receiver , need to upgrade your ExpressLRS TX module to V3.X version first.Alternative-Binding-Method-for-UART-Based-ELRS-RX              Happymodel CrossF4 ELRS 1-2S Flight Controller with Onboard UART ExpressLRS 2.4GHz...

About this product One replacement canopy for the Happymodel Mobula8, Bassline Analog/Walksnail, or Crux3.Specifications Brand Name: Happymodel Item Name: Camera Canopy for Crux3 Material: ABS Color option: Transparent black Compatible with CaddxFPV ANT camera / Walksnail Net Weight:1.2g Includes 1 x Camera Canopy 2 x Screws...

Crux35 Crux35 HD 3.5inch FPV Racer drone Frame Kit Specifications:Brand: HappymodelMaterial: 3K carbon fiber Type: 3.5 inch Frame Wheelbase: 150mm Bottom plate thickness: 3mmWeight: 26gramFlight control installation hole: 25.5mmx25.5mm and 20mmx20mm with M2 holeSupport camera: 14mm Recommended parts: (not included)Flight controller: ELRS X1 or CrazyF411 ProMotor: 1404 KV3500 Camera: 14x14mm Propeller:...

Replacement board for the moblite series whoopsSpecifications:(Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4FRMCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU-6000 (SPI connection)Original whoop size compatiblePower supply: 1S battery input (DC 2.9V-4.35V)Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 readyBuilt-in Betaflight OSD (SPI Control)Built-in 5.8G VTXBuilt-in SPI Frsky receiverBuilt-in 5V 1A BECOnboard...

The world’s first AIO 5in1 F4 flight controller with integrated SPI 2.4GHz ExpressLRS receiver has been launched. The flight controller integrates SPI controlled 2.4GHz ExpressLRS receiver, Dshot protocol 4-in-1 ESC, 5.8GHz 40ch video transmitter and Betaflight OSD. Ultra-small size and ultra-stable remote control range...

Introduction:The ELRS X1 flight controller comes with integrated SPI 2.4GHz ExpressLRS receiver and 12A Blheli_S ESC which could support 2-4s.Bigger Mosfet could support high to 12A currents would be better for 2-4S toothpick drone or long range FPV drone.And because the 2.4GHz ExpressLRS receiver is equipped with the SX1280 radio frequency chip with high sensitivity, high packet rate and low latency, this flight controller is the one that all Race/Freestyle pilots needed.The flight controller reserved 6pin SH1.0 plug for CaddxFPV Vista HD VTX and 5pin SH1.0 plug for analog VTX.Notes:  ELRS X1 flight controller will work with the ELRS 2.4Ghz TX module which was updated V1.0.0 or latest version firmware. So no need to flash old RC3 version firmware for the TX module. ( TX Module is not included, if you don't have, you need buy addtionally)Specification:Brand Name: HappymodelModel: ELRS X1Item Name: F4 Flight Controller AIO 12A ESC ELRS Receiver Flight Controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU-6000(SPI connection)Mount pattern: 20×20 M2Size:32mm*28mm*9mmPower supply: 2-4S Lipo batteryBuilt-in 12A Blheli_s ESC eachBuilt-in Betaflight OSD(SPI Control)Built-in SPI ExpressLRS 2.4GHz receiverBuilt-in 5V 1A BECFlight controller firmware target: CRAZYBEEF4SX1280 Onboard 12A BL_S 4in1 ESC MCU upgraded to EFM8BB21Power supply: 2-4S LiPo/LiPo HV (7v/17v)Currents: 12A continuous peak 15A (5 seconds)Support BLHeliSuite programmableFactory firmware: F_H_40_REV16_8.HEXDefault protocol: DSHOT150/DSHOT300/DSHOT600 Onboard SPI ExpressLRS 2.4GHz Receiver Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500HzRF Frequency: 2.4GHzAntenna plug: IPEXTelemetry output Power: <12dBmReceiver protocol:  SPI ExpressLRSCould bind with ELRS 2.4Ghz TX module(Recommend TX module with latest elrs firmware) Onboard voltage and Amperage meters  settings Voltage meter scale setting 110Amperage meter scale setting 470 Bind Procedure:1.Power the flight controller by connecting USB. Please make sure that the port driver of the flight controller is correctly installed on the computer, then open Betaflight Configurator(Latest version) to connect, enter to the “receiver” interface, and then click “Bind Receiver”, the red LED at the bottom of the flight controller will flash quickly, which means that the SPI ELRS receiver enters the bind mode. There is another way to make the receiver enter the bind mode: after connecting to the Betaflight configurator, move to the CLI interface and enter “bind_rx” in the command line.2.After correctly connecting the 2.4G ELRS TX module to your Opentx radio transmitter, copy the latest version of ELRS.LUA file to the SD card in the remote controller. The directory is “SD Card/Scripts/tools”, Then run ELRS.LUA and upgrade the firmware to latest version and click “bind” with the SPI ELRS receiver. Please make sure the packet rate is the same between the SPI ELRS Receiver and your ELRS TX module.Change packet rate for the SPI Receiver command in the CLI tabSet expresslrs_rate_index = 3Allowed range: 0 – 4Default value: 00=500Hz,1=250Hz,2=150Hz,3=50Hz,4=25Hz3.After the binding is successful, the Red LED at the bottom of the flight controller will getting to be solid, and the telemetry can be received at the same time.4.The meaning of the LED status of the SPI receiver: the LED is getting to be solid, indicating that the bind is successful or the connection and communication is normal, the LED flashing quickly indicates that the receiver is in binding mode, and the LED flashing slowly indicates that the there is no signal received from the radio controller.Share this postPackage Included:1x ELRS X1...

V3.3 Version Update log:V3.3 version comes with BMI270 or ICM42688P gyro due to MPU6000 was discontinuedOnboard VTX changed to OPENVTX support 0mw~400mwPre-install Betaflight firmware which support ELRS V2.0 TX firmwareFirmware, hex file and default diff downloadhttp://www.happymodel.cn/index.php/2022/02/23/elrsf4-2g4-v3-1-flight-controller-firmware-and-default-factory-diff/The world’s first AIO 5in1 F4 flight controller with...

NOTE: Pre installed with ELRS 3.0.1TXCO and Non TXCO will bind fine – TXCO is just more reliable in high heat enviroments / builds with low air flowEP1 EP2 ELRS receiver is the hottest Tiny ExpressLRS receiver since it was released. Now the new...

HappyModel EP1 EP2 ELRS TCXO 2.4G ExpressLRS Receiver RXNOTE: Pre installed with ELRS 3.0.1TXCO and Non TXCO will bind fine - TXCO is just more reliable in high heat enviroments / builds with low air flowEP1 EP2 ELRS receiver is the hottest Tiny ExpressLRS...

Item: Happymodel EPW5 2.4GHz pwm receiverSpecifications:ESP8285, SX1280/1281Antenna connector: IPEX MHF 1/U.FL5x PWM outputsRF Frequency: 2.4GHz (2400~2480MHz)Telemetry power: 12dbmReceiver protocol: PWM or CRSFInput voltage: +5V DC @ "+" padPCB size: 17mm x 14mmWeight: 1.1g / antennaFirmware:DIY_2400_RX_PWMP, PWM receiver via 1~5 PWM outputsHappyModel_EP_2400_RX, CRSF Serial receiver...

Now available is the TCXO version that uses a “temperature compensated crystal oscillator”, accurate frequency and excellent performance in extreme temperature environments make these TCXO much more reliable.Both versions are compatible, the TCXO version handles higher temperatures better, but either version can connect with...

Happymodel EX1103 KV11000 - Racing FPV drones, quadcopters, and equipment for miniquads.

This motor is the stock motor on the Happymodel Cine8 and Crux3. Specification Mode: EX1202.5 KV option: KV6400 KV8000 KV11000 Configure-ration:9N12P Stator Diamter:12mm Stator Length:2.5mm Out Shaft Diameter:1.5mm Inner Shaft Diameter: 2mm Dimension(Dia.*Len):15mm*15mm Weight(g):4.4g No.of Cells(Lipo): KV6400 support 2-3s (Original motors for Crux3) KV8000...

Mode: EX1404KV option: KV3500Configu-ration:9N12PStator Diamter:14mmStator Length:4mmShaft Diameter:Φ1.5mmMotor Dimension(Dia.*Len):Φ17.8mm*17.6mmWeight(g):8.7gNo.of Cells(Lipo):KV3500 compatible with 3-4S Lipo

Happymodel ExpressLRS ELRS EPW6 900MHz 6CH PWM RC receiver For Fixed-wingSpecifications:Item: Happymodel EPW6 900MHz pwm receiverESP8285, SX1276Antenna connector: IPEX MHF 1/U.FL6x PWM outputsRF Frequency: 868MHz(EU), 915MHz(FCC)Telemetry power: <17dbmReceiver protocol: PWM or CRSFInput voltage: +5V DC @ "+" padPCB size: 18.5mm x 16mmWeight: 1 g...

   New ES900TX module coming with a 2006 Fan, it would working automatically when the TX power is 250mw.the case is injection moulded that is included - also the receivers have been updated from the dev's feedback !even better than what's in the videoSource on...

HappyModel ExpressLRS EPW6 TCXO ELRS 2.4GHz 6CH PWM RC Receiver Fixed WingSpecifications: Item: Happymodel EPW6 TCXO 2.4GHz pwm receiver ESP8285, SX1280/1281 Antenna connector: IPEX MHF 1/U.FL 6x PWM outputs RF Frequency: 2.4GHz (2400~2480MHz) Telemetry power: 12dbm Receiver protocol: PWM or CRSF Input voltage: +5v~8.4v PCB...

Features Compatible with OpenTX remote controllers, including the Radiomaster TX16S and Jumper T12, T16, and T18. Helps transmitter to operate with stability under high power conditions. ExpressLRS open-source software. Ultra Long Range Low Latency SpecificationsES900RX RF Frequency: optional 915mhz or 686mHz (EU) Weight: 0.60 gram (excluding antenna)...