HAPPYMODEL

Bag of 5 IPEX-MHF3 antennas for radio receivers or the Happymodel Diamond F4 flight controller.SPECIFICATIONSLength : 50mmINCLUDED5x Receiver Antenna 2.4ghz 

Canopy for the Mobula8 and the Bassline HDZero from Happymodel. SPECIFICATIONS   Material : PP Weight : 0.8g Color : Transparent black

 Specifications Wheelbase:60mm Weight:1.7g Thickness:1.5mm Compatible with 0702/0802 motors

Cooling FanSize: 20mmx20mmx6mmWorking voltage: DC 5VWorking current: <80ma @DC5VSpeed: 1300RPMPlug: SH 1.0 2pinHydraulic bearings, quiet during operationCooling Fan for Happymodel ExpressLRS TX module ES24TX ES24TXPRO ES900TX

Replacement board for the popular Mobula 6 WhoopProduct descriptionFlight controller:(Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FRMCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU-6000(SPI connection)Board size: 28.5 * 28.5MMPower supply: 1S battery input (DC 2.9V-4.35V)Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 readyBuilt-in Betaflight OSD(SPI...

ELRS Fyujon is a very simple and easy-to-use 2-in-1 module that integrates 5.8GHz video  transmission and 2.4GHz ELRS receiver. They can be integrated into a board for use, or they can be split into independent VTX modules and receiver modules to be used separately....

The ELRS X2 flight controller comes with integrated SPI 2.4GHz ExpressLRS receiver and 12A Blheli_S ESC which could support 2-4s. Bigger Mosfet could support high to 12A currents would be better for 2-4S toothpick drone or long range FPV drone. And because the 2.4GHz...

What is a “TX Backpack”?Some of the ExpressLRS TX modules include an additional ESP8285 chip, which lets us communicate wirelessly with other ESP8285 enabled devices using a protocol called espnow. We call this chip the “TX-Backpack”. The aim of the TX-Backpack is to allow...

Features:AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTXExtreme light 1S 65mm Brushless whoop only 20gRuncam Nano3 The lightest 1/3 CMOS 800TVL CameraSmooth and powerfulCompatible for 1S Lipo/LIHVCamera Angle adjustable Specifications:Brand Name: HappymodelItem Name: Mobula6 1S 65mm Brushless whoop drone BNF versionWheelbase: 65mmSize: 80mm*80mm*37mmWeight:...

Features HD Digital VTX system available Walksnail HD or HDZERO optional SPI ELRS or UART ELRS optional Powerful EX1103 KV11000 motors Recommend 2S 450mah/550mah/650mah battery (Not included) Battery tray size: Maximum support for batteries with a width of approximately 17mm and a height of approximately...

Note: looks like a spot to solder on some BT2 connectorsyou can now put your 1s batteries in storageSpecification:Connection to the charger in XT60 + 4S balancing plugMax amperage: 1.5ASupports up to 4 1S lipos simultaneouslyWeight: 35gDimensions: 81 * 46 * 20mmSelection of the...

Description:Brand:HappymodelItem Name:1s 650mah 30C Lipo Lihv 3.8v BatteryCapacity:650mAhVoltage:3.8VContinuous Discharge Rate: 30CInstantaneous discharge rate: 60CSize: 60mmx18mmx8mmWeight: 16gConnector: PH2.0Package Included:1x 1s 650mah 30C Lipo Lihv 3.8v Battery

Happymodel 2.4g ExpressLRS ELR ES24TX Slim Pro TX module for X-lite Tango2 NEW BATCH - Telemetry working ! This Slim Pro TX module is designed by Happymodel and based on the open source- ExpressLRS which is a very popular low latency and high packet...

This Micro TX is designed by Happymodel and based on the open source- ExpressLRS which is a very popular low latency and high re-flashed rate RF module for RC Airplane and FPV Racing. Its main hardware architecture is ESP32, ESP8285 and SX1280 RF chip....

The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip....

The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip....

Introduce the World first true diversity 2.4 GHz ExpressLRS Rx with RF amps!Check out our ExpressLRS Collection, all our Receivers and the rest of our Happymodel Products!Specifications: Item: Happymodel EP1 Dual receiver true diversity 2.4Ghz ExpressLRS RXESP32 PICO D4, dual SX1280(SX1281) Antenna connector: IPEX MHF 1/U.FL RF Frequency: 2.4GHz (2400~2480MHz) Telemetry power: >19dbm Receiver protocol: CRSF Input voltage: +5V DC @ “+” pad PCB size: 19mm x 14mm Weight: 1gram exclude antenna Firmware:...

HappyModel Bassline 2 Inch Micro 2S Toothpick FPV FreeStyle Drone BNF ELRSThe Happymodel Bassline 2s Fpv Racer was inspired from happymodel team pilot Nathan Loopz. This idea was originally born in 2019 and now finally it comes true.Features: X12 5-IN-1 AIO flight controller built-in 2.4G...

Introduce the Bassline, inspired from Our team pilot Nathan LoopzEven though we have many excellent Micro Freestyle drones now days, the Bassline’s performance is still the craziest!Specifications: Wheelbase: 90mm Size: 115mm*115mm*40mm 3K carbon Motor Mounting: 9x9mm/12x12mm M2 Includes: 1 x 3K carbon fiber bottom plate...

915MHZ version for use in AustraliaThe World first AIO 5in1 whoop flight controller built-in Expresslrs receiver is coming out now. This F4 flight controller built-in 5A esc , VTX, OSD , high performance 900MHz expresslrs receiver, it’s best for 1S Long Range and Tinywhoop.Specifications:...