Accessories

 SKU ACC-STACK-AP Name Mamba Universal parts package    Describtion List：                      4.5*1.5 Damping silica ring*10         6*2 Damping silica ring*10                M2 silica damping standoff *5             M3 silica damping standoff*5             M2*4.5*2 insulated standoff*10                 3*5*3 White Toothless nylon standoff*10              M2 Black Nylon Nut*10                    M3 Black Nylon Nut*10                 

Buzzer for the Naze / Lazybee / KK2 / Flip Great to get audible feedback from the flight controller and also low battery alarm. If you are flying a mini an essential piece of hardware to help you find a down model. 5cm -...

Matek Voltage Spikes Filter XT60-TVS (Pack of 5)What is a TVS Diode and How Does it Work? The Transient Voltage Suppression diode (TVS) is a component that is commonly used for transient protection. It consists of a p-n semiconductor junction that becomes conductive during...

The BLITZ BEC features step-down switch mode, high-efficiency synchronous rectification, and the ability to step down from an input voltage of up to 35V to a low output stable voltage, which makes it ideal for step-down voltage applications.It offers a very compact solution to...

ExpressLRS Recovery Dongle is an FTDI USB to TTL module based on the CP2102 bridge controller, which is applied to the firmware upgrade for the ESP32&ESP8XX chip. The ExpressLRS Recovery Dongle is compatible with many ELRS receivers in the market such as ELRS Lite Receiver, ELRS...

In our FPV hobby, capacitors are becoming an essential component due to high power motors and noisy electronics.Don't forget to use a capacitor to protect your electronic system and get better video quality!Description:Model Number: 35V 470uFTemperature: -55~+125°CMaximum Voltage: 160VTolerance:±20% maxIncludes:1x 35v 470uf Capacitor

APPLICATIONS: Flight controllers without dedicated BEC for servos Reduces circuit loss and voltage drop on servo power wires for big scale RC Airplane SPECIFICATIONS: 5.5V to 36V Operating Input Range Vx for servos,  5V, 6V, 7.2V, 8.2V Adj. Default is 5V. 4A Continuous load current, 7A Burst Maximum Duty...

This sensor works basically the same way as an optical mouse, helping your iNAV quad to maintain position without GPS! This module also integrates a laser time-of-flight range sensor. Check out Paweł Spychalski's video below.For a comprehensive guide check out Setting up Optic Flow in INAV by...

Input voltage 3-8S(12-36V) BEC Output 12V 1A Dimensions 16.9(L)*11.95(W)*1.15(H)mm Weight 1.5g

The CLRACING Bluetooth adapter allows you to use the Speedybee app that's compatible with both Android and IOS to tune your flight controller.The module will get power once plugged to the FC USB- with compatible OTG Fc's Features2s-8s power input, at the same time, the...

   ​10PCS 26# 26AWG 30 Cores Flight Control Connection Cable Male to Male Servo Cable JR Description:- Flight control connection cable, male to female servo cable, suitable for quadcopter multicopter connection- Specs: 26AWG 26 # 30cores - Copper core: 30 cores- Copper dia: 0.08mm- Length: JR/futaba...

Backwards-compatibility for mounting the new TBS Lucid 6S flight stack on any 20x20 compatible frame. The 20x20 adapter provides 3 different mounting locations in direction of flight for improved placement within the frame and holds down your ESC snug with plenty of clearance for...

This is a small stand alone 5v regulator. Earlier FlightOne boards (non OSD versions) are supplied 5v power from the ESC. The newer OSD boards take full battery voltage so if you are using a Millivolt (non OSD) or Revolt (non OSD) with a 32bit...

Practical and complete, this cable kit has all the connectors you need for your electronic components.You won't need any tools since these cables snap into the connectors. INCLUDED   180x 150mm wires with pre-crimped pin (6 colors) 20x 3 pin connectors 20x 4 pin connectors 20x 5 pin connectors 20x 6...

Backwards-compatibility for mounting the new TBS Lucid 6S flight stack on any 20x20 compatible frame. The 20x20 adapter provides 3 different mounting locations in direction of flight for improved placement within the frame and holds down your ESC snug with plenty of clearance for...

In our FPV hobby, capacitors are becoming an essential component due to high power motors and noisy electronics.Don't forget to use a capacitor to protect your electronic system and get better video quality!Description:Model Number: 16V 470uFTemperature: -55~+125°CMaximum Voltage: 160VTolerance:±20% maxIncludes:1x 16v 470uf Capacitor

The latest version of the Swagger Sleeve v2 to keep your quads internals clean and dry. Add some style to your quads while tearing up the skies!Check out this neoprene quad sleeve designed by Swagger. Whether you are flying on snow, dirt, concrete or...

Antispark is a handy component that prevents the spark from jumping when connecting the battery to the copter. This is caused by the rapid charging of the capacitor on the regulator and is noticeable especially with 6S copters. In addition to the unpleasant sound,...

Rather than using the ridgid flight controller standoffs try one of these on your next build - sits a little higher but can cut any vibrations from poorly balanced props or unbalanced motors.  

This connector cable set is customized for F4 V2 4S FC and BLHeli_32 ESC. Convenient for installation with ESC, RX, LED board and camera on Beta85X 4S Whoop Drone.Bullet point Optimize the connection with the F4 V2 4S FC , reducing the solder process....