ELRS Receivers

The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip....

HappyModel EP1 EP2 ELRS TCXO 2.4G ExpressLRS Receiver RXNOTE: Pre installed with ELRS 3.0.1TXCO and Non TXCO will bind fine - TXCO is just more reliable in high heat enviroments / builds with low air flowEP1 EP2 ELRS receiver is the hottest Tiny ExpressLRS...

ExpressLRS Recovery Dongle is an FTDI USB to TTL module based on the CP2102 bridge controller, which is applied to the firmware upgrade for the ESP32&ESP8XX chip. The ExpressLRS Recovery Dongle is compatible with many ELRS receivers in the market such as ELRS Lite Receiver, ELRS...

Features Compatible with OpenTX remote controllers, including the Radiomaster TX16S and Jumper T12, T16, and T18. Helps transmitter to operate with stability under high power conditions. ExpressLRS open-source software. Ultra Long Range Low Latency SpecificationsES900RX RF Frequency: optional 915mhz or 686mHz (EU) Weight: 0.60 gram (excluding antenna)...

The frequency of ELRS-2.4G-NANO is 2.4Ghz, based onReceiver for ESP8285 MCU, supports WIFI upgrade, and has 100mw return power.  Specification: Model:ELRS 2.4G NANO RF Freq: 2.4Ghz IC: SX1281+ESP8285 TX Power: 100mW Color: Black Connector: IPEX1 Firmware:  BETAFPV NANO 2400 RX Input Power: 3.6~5.5v Weight: 0.4g...

Happymodel ExpressLRS ELRS EPW6 900MHz 6CH PWM RC receiver For Fixed-wingSpecifications:Item: Happymodel EPW6 900MHz pwm receiverESP8285, SX1276Antenna connector: IPEX MHF 1/U.FL6x PWM outputsRF Frequency: 868MHz(EU), 915MHz(FCC)Telemetry power: <17dbmReceiver protocol: PWM or CRSFInput voltage: +5V DC @ "+" padPCB size: 18.5mm x 16mmWeight: 1 g...

NOTE: Pre installed with ELRS 3.0.1TXCO and Non TXCO will bind fine – TXCO is just more reliable in high heat enviroments / builds with low air flowEP1 EP2 ELRS receiver is the hottest Tiny ExpressLRS receiver since it was released. Now the new...

Ready to elevate your FPV simulation experience?Whether you're an experienced pilot or a beginner, no more cables!This ELRS 2.4G USB dongle is THE practical solution for connecting your wireless radio to your PC and enjoying your favorite simulator.  Note: Only compatible with TX ExpressLRS 2.4G radios/modules       ...

ELRS-R24-S Specifications ESP8285, SX1280IMLTRT PA/LNA: AT2401C molex 479480001 SMT antenna RF Frequency: 2.4GHz ISM Telemetry power: 20dbm Receiver protocol: CRSF Input voltage: 4~9V DC @ 5V pad Power dissipation:  40~45mA(before binding), 60~65mA(binding), 90~95mA(wifi mode) PCB size: 21mm x 15mm Weight: 1.2g Packing: 1x ELRS-R24-S...

HappyModel ExpressLRS EPW6 TCXO ELRS 2.4GHz 6CH PWM RC Receiver Fixed WingSpecifications: Item: Happymodel EPW6 TCXO 2.4GHz pwm receiver ESP8285, SX1280/1281 Antenna connector: IPEX MHF 1/U.FL 6x PWM outputs RF Frequency: 2.4GHz (2400~2480MHz) Telemetry power: 12dbm Receiver protocol: PWM or CRSF Input voltage: +5v~8.4v PCB...

NewBeeDrone BeeCeiver ExpressLRS ELRS 2.4Ghz Diversity with TCXO Oscillator Micro Receiver Discover the NewBeeDrone BeeCeiver ExpressLRS 2.4Ghz Diversity Micro Receiver, a marvel in compact and efficient design. Equipped with the industry-leading TCXO (temperature-compensated crystal oscillator), this micro receiver ensures unmatched signal stability and precision...

Upgrade to ELRS2.4Ghz with this nano combo packReally small receivers with great range and an all in one transmitter module with screen. Bundle and Save. Check individual products links for full part detailsJumper ELRS ModuleHappyModel EP2 Receiver   Have a standard JR Bay -...