Receivers

The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip....

TBS is stepping up the Long Range / UHF game, with no competition in sight! With the TBS Crossfire Nano RX we condense 2 years of engineering experience, listening to our customer requirements, and pushing ourselves to the maximum (or in this case, the...

TBS is stepping up the Long Range / UHF game, with no competition in sight! With the TBS Crossfire Nano RX we condense 2 years of engineering experience, listening to our customer requirements, and pushing ourselves to the maximum (or in this case, the...

1 replacement IPEX antenna. Fits the latest FrSky X4RSB, R-XSR or the XM+Note: FrSKY has changed the antenna plug on the latest X4RSB and S6R Receivers and this is the replacement antenna.SpecificationsLength: 15cmConnector Height: 1mmConnector Width: 2.1mm If you require the older style UFL connector...

THE EXTRA EXTENDED TBS IMMORTAL T V2 ANTENNA!With improved signal sensitivity and durability, the extended Immortal T antenna is the perfect companion for long range pilots with big big rigs.The centerpiece housing is made out of a rubberized plastic material which will allow a...

HappyModel EP1 EP2 ELRS TCXO 2.4G ExpressLRS Receiver RXNOTE: Pre installed with ELRS 3.0.1TXCO and Non TXCO will bind fine - TXCO is just more reliable in high heat enviroments / builds with low air flowEP1 EP2 ELRS receiver is the hottest Tiny ExpressLRS...

The default antenna included with the TBS Tracer is the Immortal T 2.4GHz antenna, manufactured by TBS. It is made from light weight, multi-strand stainless steel wire in an injected rubber enclosure, RF balanced with a balun between active element and ground.  The combination...

TBS TRACER NANO RX FEATURES: 250Hz: Fastest available radio and telemetry link! Next generation 2.4GHz technology meets robust Crossfire radio engine 3ms end to end latency Nano-sized receiver with antenna diversity 15mi+/25km+ range For drones, planes, helicopters, cars and boats TBS TRACER NANO RX...

Item name: 915MHZ T antennaWeight: 3.4gWidth: 16.4cmCable length: 80mmColor: optional black / redConnector: optional IPEX / UFL Usage: for TBS Crossfire Receiver Package included:1 x 915MHZ T antenna

Frsky / flysky 15cm replacement antenna 2.4ghzif you have chopped up your antennas on your d4rII or your older x4r then these are what you need.If you are using the new x4r r-xsr, xm+ receivers you have the ipx connectors - try these ones

Introduce the World first true diversity 2.4 GHz ExpressLRS Rx with RF amps!Check out our ExpressLRS Collection, all our Receivers and the rest of our Happymodel Products!Specifications: Item: Happymodel EP1 Dual receiver true diversity 2.4Ghz ExpressLRS RXESP32 PICO D4, dual SX1280(SX1281) Antenna connector: IPEX MHF 1/U.FL RF Frequency: 2.4GHz (2400~2480MHz) Telemetry power: >19dbm Receiver protocol: CRSF Input voltage: +5V DC @ “+” pad PCB size: 19mm x 14mm Weight: 1gram exclude antenna Firmware:...

ExpressLRS Recovery Dongle is an FTDI USB to TTL module based on the CP2102 bridge controller, which is applied to the firmware upgrade for the ESP32&ESP8XX chip. The ExpressLRS Recovery Dongle is compatible with many ELRS receivers in the market such as ELRS Lite Receiver, ELRS...

Set of 5pcs 2.4GHz monopole antenna for TBS Tracer Nano RX or any other receiver with IPEX / u.FL connector.SPECIFICATION Total length: 110mm Weight: 0.33g Connector: IPEX / u.FL Expected range: 3mi+/5km+ (with TBS Tracer) 

Product descriptionSuit for RC Remote Control Vehicles FPV Drone Quadcopter Multicopters Boats 2.4G ReceiverFeatures:1. Insulation effect, keeping the antennas out of harm away while not breaking in a crash.2. Usually the receiver antenna is soft and fragile ,with the protection tube, you don't need to...

With this board you can enable connectivity's with your servos via 6ch PWM. SPECIFICATION  Weight: 3.24g Size: 27 x 20 x 7mm (With Pins)

Bag of 5 IPEX-MHF3 antennas for radio receivers or the Happymodel Diamond F4 flight controller.SPECIFICATIONSLength : 50mmINCLUDED5x Receiver Antenna 2.4ghz 

Manual :1.Mamba TX500 VTX Manual2.Mamba MSR SBUS ManualMAMBA MSR D16 ACCST Receiver（FCC）Working Voltage:3.5- 10VWorking Current: 70mA /5VChannel:16CH(1~16CH: SBUS,1~8CH:CPPM)Size: 24×11.7×4.4mmAntenna Connector: IPEX4Protocol： ACCST D16/（ACCESS needs to upgradethe corresponding protocol）Product Size:24×11.7×4.4mm M2（20mm×2）Weight:1.6gMAMBA TX500 Video TransmitterWorking Voltage:4.5- 5.5VWorking Current: 380mA (5V/500mw)Working Temperature: 90 ℃Video Input Impedance:50ΩSize: 24×11.7×5.5mmAntenna...

Features Compatible with OpenTX remote controllers, including the Radiomaster TX16S and Jumper T12, T16, and T18. Helps transmitter to operate with stability under high power conditions. ExpressLRS open-source software. Ultra Long Range Low Latency SpecificationsES900RX RF Frequency: optional 915mhz or 686mHz (EU) Weight: 0.60 gram (excluding antenna)...

After creating one of the best micro receivers on the market, we went back to the lab and improved the range by almost double! By using diversity antennas (The world's smallest diversity DSM compatible receivers) not only are you getting better range, but your...