Menu
Your Cart
Warehouse Open for Click and Collect orders
Mon - Fri (1630 - 1800)   Sat(0900 - 1230)

eSun General Purpose LCD 3D Print Resin 500g

eSun General Purpose LCD 3D Print Resin 500g
eSun General Purpose LCD 3D Print Resin 500g
eSun General Purpose LCD 3D Print Resin 500g
eSun General Purpose LCD 3D Print Resin 500g
eSun General Purpose LCD 3D Print Resin 500g
eSun General Purpose LCD 3D Print Resin 500g
eSun General Purpose LCD 3D Print Resin 500g
eSun General Purpose LCD 3D Print Resin 500g
eSun General Purpose LCD 3D Print Resin 500g
eSun General Purpose LCD 3D Print Resin 500g
New
eSun General Purpose LCD 3D Print Resin 500g
eSun General Purpose LCD 3D Print Resin 500g
eSun General Purpose LCD 3D Print Resin 500g
eSun General Purpose LCD 3D Print Resin 500g
eSun General Purpose LCD 3D Print Resin 500g
eSun General Purpose LCD 3D Print Resin 500g
eSun General Purpose LCD 3D Print Resin 500g
eSun General Purpose LCD 3D Print Resin 500g
eSun General Purpose LCD 3D Print Resin 500g
eSun General Purpose LCD 3D Print Resin 500g
eSun General Purpose LCD 3D Print Resin 500g
  • Stock: In Stock
  • Model: eSun General Purpose LCD 3D Print Resin 500g
AUD $29.95

Available Options

Esun General Purpose LCD 3D Print Resin is specifically designed for LCD/LED light source printers to achieve better printing quality.

Product Features

  • General Purpose Resin, Compatible to most LCD printers and DLP with LED UV.
  • High Hardness 88 shore D, Low Shrinkage
  • Faster Printing Speed
  • Low Odor and No Toxic

Resin parameters

Solidify wavelength: 395nm to 405nm
Hardness (D): 88D
Viscosity (25C,mPa.s): 100 to 150 mpa.s
Density: 1.07 to 1.12 g / cm3
Shrinkage of Vol.: 3.72%-4.24%

Physical Properties

Flexural strength (Mpa): 59Mpa to 70Mpa
Flexural Modulus (Mpa): 1.88 to 2.38
Tensile strength (Mpa): 35Mpa to 42 Mpa
Elongation at break (%): 11% to 20%
Hardness (D): 88D

Precautions

1. Storage

  • 1) Keep away from light and sealed at room temperature.
  • 2) It is recommended to store the resin between 15 Celsius and 35 Celsius in its original container.
  • Avoid any dusty or moist environment.

2. Usage

  • Shake well before use. Avoid any direct sunlight during usage.
  • Keep it away from the children. Do not put in mouth. 
  • Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
  • If accidentally contacted, please wash with plenty of water immediately. Seek medical advice if necessary.
  • Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds.

Write a review

Please login or register to review