The eSun flexible 3D printing resin offers high flexibility and elasticity, as well as good toughness and wear-resistance. Esun flexible resin is a perfect new material for resin prints that require some flexibility, like cushions, handles, and grips.
Product Features
- Shore A hardness of 85-90
- High flexibility, no break after multiple folds
- Good toughness and wear-resistance
- Low odour
Printing Recommendations
The recommended print temperature is 25-35℃. Heating before use is needed under low temperatures.
Make sure the rising height is more than 8mm after exposure of each layer. The rising speed is within 60 mm/min. The waiting time between two exposure is more than 10s.
Put the printed model in water for post-curing, then under direct sunlight for 30 min, or under LED light for 15mins.
Mechanical Properties
Mechanical properties of post-cured material
| Shore A Hardness | 85-90 |
| Tensile strength MPa | 6-8 |
| Elongation at break/% | 100-150 |
| Tearing Strength/kN·m-1 | 390-420 |
| Proportion（H2O，25℃） | 1.116 |