Rising Sun - 8k Nova UV Resin

• 【Low Shrinkage & High Precision】Nova Resins are developed for low shrinkage and high precision printing. Their low warpage & dimensional stability are especially good for precise parts.
• 【Low Viscosity & Low Odor】Nova Resins are easy to print and are easily post-processed due to their low viscosity. Meanwhile, their low odor will not make your place smell.
• 【Wide Application】Printed parts are tough and resilient. Nova Resins make them a perfect match not only for painted models but also for industrial applications.

Specifications

• Size - 1000ml bottle  
• Wavelength - 405nm UV
• Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 2-15s depending on printer. (Please use the printing exposure list below for your printer settings.) 
• Suitable for most DLP/LCD 3D printers
• Density: 1.1 g/cm3
• Viscosity: 280-380 cps
• Surface Hardness: 82 Shore D
• UTS: 43 MPa
• Tensile modulus: 1730 MPa
• Elongation at Break, EAB: 8 %
• Izod notched impact strength: 10 J/m

 Precautions:

• Storage method:

1. Keep away from sunlight and UV light.
2. We recommended to store Nova Resin at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality.
3. Nova Resin has a shelf life of up to 18 months.
4. After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
5. 
   

   Do not drink it and keep it sealed and out of the reach of children.

   
   

   
   

• Usage:

1. Shake well before use.
2. Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
3. Inadvertent contact, as soon as possible use water to rinse area. If you feel unwell, seek timely medical attention.
4. Clean printed models with high-concentration alcohol (IPA95%-99%). Clean models for 30S-60s. Ensure all resin is removed and cleaned from inside the model.
5. Do not pour the resin into the resin along with unused resin, and do not leave the resin in the resin vat for an extended period without use to avoid resin pollution.
6. DO NOT dump resin. Please cure it and treat it as general plastic garbage.

Documents

• Printer exposure settings 
• MSDS