Racing

SPECIFICATION Material:PC Weight:3.9g Pitch:3.6in Prop Dia:134.1mm Center Thickness:6mm Center Hole Dia:5mm  Colors: Clear Gray, Orange, Milk White, Purple Features: Racing Propeller; Faster, more aggressive and powerful than normal 5/5.1 inch. Package Includes: 2CW + 2CCW props 

Specifications Inner diameter: (Prop Mount) 5mm Usage: 5.1" or greater frame Material: Polycarbonate Color: Clear Red Weight: 5.2g POPO Compatible: Yes Includes 5x T5150-1 CW Propellers 5x T5150-1 CCW Propellers

New Props from HQ extending the popular V1s lineup with 4.8 pitchGreat colours and excellent durability

The Tinyhawk 1s lipo battery is also part of the whole design around the great flight performance of the TinyHawk. The weight, the size and the power from the High Voltage 450mah capacity cell were all considered during the design process. Engineers tested countless...

WHEN ONE OF THE HANDS DOWN FASTEST PILOTS ON THE PLANET OPENS THE CAD SOFTWARE TO DRAW HIS OWN FRAME FROM SCRATCH YOU SHOULD START PAYING ATTENTION. THE JS-1 HAS ALREADY CLOCKED UP 80+ OFFICIAL RACE WINS IN THE LAST 3 MONTHS OF TESTING, NO...

The TMOTOR BMS Racing Raptor V2 2306.5 brushless racing motor was developed in collaboration with Thomas Bitmatta (BMSWEB).The BMS Racing Raptor series was made to the highest standards of FPV racing.Unique Point Improved Heat Management New Bronze Finish Higher Response Race Durability Suitable for...

AZURE POWER 5148 SFPSFP. Stands for Strong Fast Prop.It’s specially designed for racing. Pushing power and agility to reach new height, allwhile retaining an incredible in-control feel.An all new airfoil design, with a large critical angle of attack, gives you the thrust thatyou need...

CRUX35 HD comes fitted with 2.4ghz ELRS - but you can install your own receiver if you don't own an ELRS TransmitterCRUX35/CRUX35 HD is an ultra-lightweight 3.5Inch FPV Freestyle FPV Racing Drone, the weight of the whole drone is only 87g for the analog...

Plug and play version - install your receiver of choiceor use the dji controller                    Introduction:The CineLog35 HD developed by GEPRC specifically for GoPro HD camera mounting completely is now officially released, There are two versions currently available: HD VISTA Nebula Pro and Analog.CineLog35 is improved and developed on the basis of CineLog30. Integrated protection guard design, the overall structure is firmer and durable. We adopts latest GEP F722-35A-AIO FC with higher calculation speed and high efficiency, the 5 UART Ports bring perfect performance and sufficient extended function. and the electronic system runs more stable.CineLog35 equips with VISTA HD VTX and the Nebula Pro camera, and the picture quality is extreme clear and clean. Upgraded power system, 2004 motor with D90-3 propeller has stronger power output. It comes with a 3D Print mount for Gopro 9 & Gopro 10.  and the Incidental base can carry Insta360 GO2 camera/ Naked Hero 8/Caddx Peanut camera.Feature:1. Upgrade 3.5-inch integrated protection guard to ensure flight safety. The new design has significant roles at many aspects such as Low noise, Vibration and noise reduction, durable high-strength structural design.2. Equipping with VISTA HD VTX and the Nebula Pro camera.3.It comes with a 3D Print mount for Gopro9 & for Gopro10. and the Incidental base can carry Insta360 Go2 camera/Naked Hero8/Caddx Peanut camera.4. Improving the damping rings, the shooting effect is more stable,clearer and reduce jelly.5. 2004 motor with D90-3 propeller has stronger power output.6. Independent receiver cabin, conveniently and quickly to binding.7. The GEPRC Team's Tuning and the overall flight feel is delicate and flexible.Specification:Brand Name: GeprcModel: Cinelog35 HDItem Name: 142mm F7 4S/ 6S...

The SOURCE PODRACER is a ultralight racing frame, made for speed addicts and grassroots fpv racers. It is designed to maximize speed and minimize drag. It fits and protects all the current toothpick-style FPV components and is optimized for light weight. The SOURCE PODRACER...

Nanohawk  X Parameter Diagonal wheelbase (without paddles) 120mm Maximum size of the aircraft (without paddles) 100*100*35mm Aircraft weight (without battery) 41±2g Motor TH12025 11000KV Propeller Avia Tinyhawk 1609 3 inch 2 blade propeller Main Flight Controller F4（MATEKF411RX firmware） 4 in one 5A ESC SPI RX receiver（Compatible with Frsky...

Description Specification:Brand Name: FLYWOOModel: Vampire2Item Name: 210mm 5.1 Inch Frame KitMaterial: Full 3K Carbon FiberWheelbase: 210mmFrame Type: X type Arms Plate Thickness: 5mmSide Plate Thickness: 1.5mmTop Plate Thickness: 2mmBottom Plate Thickness: 3mmProtect Plate Thickness: 2mmSize: 139*151mm@ 210mm Features:- Super lightweight racing frame- Beautiful appearance design , durable in crashing- Quick...

Introduction:The ELRS X1 flight controller comes with integrated SPI 2.4GHz ExpressLRS receiver and 12A Blheli_S ESC which could support 2-4s.Bigger Mosfet could support high to 12A currents would be better for 2-4S toothpick drone or long range FPV drone.And because the 2.4GHz ExpressLRS receiver is equipped with the SX1280 radio frequency chip with high sensitivity, high packet rate and low latency, this flight controller is the one that all Race/Freestyle pilots needed.The flight controller reserved 6pin SH1.0 plug for CaddxFPV Vista HD VTX and 5pin SH1.0 plug for analog VTX.Notes:  ELRS X1 flight controller will work with the ELRS 2.4Ghz TX module which was updated V1.0.0 or latest version firmware. So no need to flash old RC3 version firmware for the TX module. ( TX Module is not included, if you don't have, you need buy addtionally)Specification:Brand Name: HappymodelModel: ELRS X1Item Name: F4 Flight Controller AIO 12A ESC ELRS Receiver Flight Controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU-6000(SPI connection)Mount pattern: 20×20 M2Size:32mm*28mm*9mmPower supply: 2-4S Lipo batteryBuilt-in 12A Blheli_s ESC eachBuilt-in Betaflight OSD(SPI Control)Built-in SPI ExpressLRS 2.4GHz receiverBuilt-in 5V 1A BECFlight controller firmware target: CRAZYBEEF4SX1280 Onboard 12A BL_S 4in1 ESC MCU upgraded to EFM8BB21Power supply: 2-4S LiPo/LiPo HV (7v/17v)Currents: 12A continuous peak 15A (5 seconds)Support BLHeliSuite programmableFactory firmware: F_H_40_REV16_8.HEXDefault protocol: DSHOT150/DSHOT300/DSHOT600 Onboard SPI ExpressLRS 2.4GHz Receiver Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500HzRF Frequency: 2.4GHzAntenna plug: IPEXTelemetry output Power: <12dBmReceiver protocol:  SPI ExpressLRSCould bind with ELRS 2.4Ghz TX module(Recommend TX module with latest elrs firmware) Onboard voltage and Amperage meters  settings Voltage meter scale setting 110Amperage meter scale setting 470 Bind Procedure:1.Power the flight controller by connecting USB. Please make sure that the port driver of the flight controller is correctly installed on the computer, then open Betaflight Configurator(Latest version) to connect, enter to the “receiver” interface, and then click “Bind Receiver”, the red LED at the bottom of the flight controller will flash quickly, which means that the SPI ELRS receiver enters the bind mode. There is another way to make the receiver enter the bind mode: after connecting to the Betaflight configurator, move to the CLI interface and enter “bind_rx” in the command line.2.After correctly connecting the 2.4G ELRS TX module to your Opentx radio transmitter, copy the latest version of ELRS.LUA file to the SD card in the remote controller. The directory is “SD Card/Scripts/tools”, Then run ELRS.LUA and upgrade the firmware to latest version and click “bind” with the SPI ELRS receiver. Please make sure the packet rate is the same between the SPI ELRS Receiver and your ELRS TX module.Change packet rate for the SPI Receiver command in the CLI tabSet expresslrs_rate_index = 3Allowed range: 0 – 4Default value: 00=500Hz,1=250Hz,2=150Hz,3=50Hz,4=25Hz3.After the binding is successful, the Red LED at the bottom of the flight controller will getting to be solid, and the telemetry can be received at the same time.4.The meaning of the LED status of the SPI receiver: the LED is getting to be solid, indicating that the bind is successful or the connection and communication is normal, the LED flashing quickly indicates that the receiver is in binding mode, and the LED flashing slowly indicates that the there is no signal received from the radio controller.Share this postPackage Included:1x ELRS X1...

Specifications: Size: 5.1" Pitch 4.7" Blades 3 Weight 4.4g Mounting hole M5 Center Hub Thickness 7mm POPO Compatible Yes Package contains  5 x CW and 5 x CCW propellers.

HGLRC ZeusF748 STACK FPV Racing Drone 3-6S F722 Flight Controller 48A BL_S 4in1 ESCUsage:for 100mm-450mm Frame KitFC Firmware:BF HGLRCF722(HGLR)Installing Hole:30.5X30.5mm.M3Weight:26.5gItem Name:ZeusF748 STACKZeus F722 Flight ControllerMPU:MPU6000CPU:STM32F722 RET6Input Voltage:3-6S LipoZeus 48A BL_S 3-6S 4in1 ESCInput Voltage:3-6S LipoSteady Current:48APeak Current:55A（10 Sec）Package Included:1x Zeus F722 Flight Controller1x Zeus...

Description: Dalprop newly released CYCLONE T5046 propeller More thrust Faster reaction Easier cornering Less noise Excellent aerodynamics  Designed to be the best for drone racing, the best props on the market.  by Dalprop   Package Include: 2 x CW props 2x CCW props

This is the second iteration of an evolution of The Raven, a race frame we have had in development for years. We found that the raven was exceedingly stable but there were a few few things we liked about true-x arm geometry and here we...

HQ Durable Prop  5X5X3V1S (2CW+2CCW)-Poly Carbonate Racing Profile v1s Props from HQ Prop Polycarbonate for durability.  

* FrameWheelbase: 90mmDry Weight: 47.5gAll Up Weight: 73g with 2x 450mAh 1S batteryFrame Material: Polypropylene & Carbon Fiber* MotorsStator Size: 1103Kv: 7500kvPropeller Mount: T-mountPropeller: Avan Blur 2"/span>* All-In-One (AIO) Flight ControllerFlight Controller: F4 (MATEKF411RX Firmware)ESC: 4-in-1 5A BlHeli_SReceiver: EMAX SPI Receiver (Compatible with FrSky D8 mode)Battery Connector: JST-PH2.0 Duo* FPV...